www.rfm.com e-mail: info@rfm.com page 1 of 6 ?2009-2010 by rf monolithics, inc. SF2089C - 6/14/10 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 ? and measured with 50 ? network analyzer. 2. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depen dent on pcb layout and external impedance matching design. see application note no. 42 for details. 3. the design, manufacturing process, and specifications of this filter are subject to change. 4. tape and reel standard ansi / eia 481. 5. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 6. us and international patents may apply. 7. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. electrical characteristics characteristic sym notes min typ max units center frequency f c 1 327.5 mhz insertion loss 112db 1.5 db bandwidth bw 1.5 135 mhz amplitude ripple, f c 17.5 mhz, within adjacent 5 mhz windows 1 1 db p-p group delay deviation, f c 17.5 mhz, within adjacent 5 mhz windows 1 50 ns p-p group delay deviation, f c 17.5 mhz, full bandwidth 1 50 100 ns p-p vswr at f c 1 2.5:1 40 db rejection bandwidth 1, 2 65 mhz operating temperature range -40 85 c case style sm5050-8 5 x 5 mm nominal footprint lid symbolization (y=year, ww=week, s=shift) rfm 591 ywws sm5050-8 ? low insertion loss 5.0 x 5.0 mm surface-mount case single-ended input and output complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +13 dbm maximum dc voltage on any non-ground terminal 30 vdc storage temperature range in tape and reel -40 to +85 c suitable for lead-free soldering - maximum soldering temperature 260 c for 30 s 327.5 mhz saw filter SF2089C pb caution: electrostatic sensitive device. observe precautions for handling. notes: electrical connections connection terminals port 1 input 1 port 2 output 5 ground all others dot indicates pin 1
www.rfm.com e-mail: info@rfm.com page 2 of 6 ?2009-2010 by rf monolithics, inc. SF2089C - 6/14/10 ch1 s11 1 u fs centr 327 . 500 mhz span 100 . 000 mhz c prm ch2 s21 log 10 db/ ref -12 db center 327 . 500 000 mhz span 100 . 000 000 mhz c prm ch3 s22 1 u fs centr 327 . 500 mhz span 100 . 000 mhz c 18 nov 2005 15:21:41 1 2 3 4 1 : 0 . 0000 0 . 0000 0 . 0000 h 0 . 000 000 mhz ref=1 ch1 markers 2 : 3 . 0195 1 . 6621 282 . 553 khz 3 : 9 . 3320 8 . 3770 -19 . 5794 mhz 4 : -2 . 2051 -6 . 1328 20 . 1445 mhz 1 2 3 4 1 : 0 . 0000 db 0 . 000 000 mhz ref=1 ch2 markers bw : 39 . 723986 mhz cent : 327 . 782553 mhz q: 8 . 2515 1_ loss : -10 . 490 db 1 2 3 4 1 : 0 . 0000 0 . 0000 0 . 0000 h 0 . 000 000 mhz ref=1 ch3 markers 2 : 2 . 5342 4 . 0986 282 . 553 khz 3 : 70 . 313 m 1 . 7891 -19 . 5794 mhz 4 : 13 . 325 -2 . 1670 20 . 1445 mhz SF2089C full full
www.rfm.com e-mail: info@rfm.com page 3 of 6 ?2009-2010 by rf monolithics, inc. SF2089C - 6/14/10 ch2 s21 del 50 ns/ ref 345.2 ns c smo prm ch4 s21 log 1 db/ ref -9.099 db center 327 . 500 000 mhz span 40 . 000 000 mhz c 18 nov 2005 15:16:08 1 2 3 3 : -4 . 4823 ns -30 . 000 000 mhz ref=2 ch2 markers mean : 335 . 96 ns s . dev : 6 . 4094 ns p-p : 25 . 616 ns 1 2 3 3 : . 33450 db -30 . 000 000 mhz ref=2 ch4 markers mean : -10 . 745 db s . dev : . 22620 db p-p : 1 . 0238 db SF2089C full
www.rfm.com e-mail: info@rfm.com page 4 of 6 ?2009-2010 by rf monolithics, inc. SF2089C - 6/14/10 rfm rfm rfm drill all holes #76 drill (0.020) all holes are plated thru. 1.590 ref.
www.rfm.com e-mail: info@rfm.com page 5 of 6 ?2009-2010 by rf monolithics, inc. SF2089C - 6/14/10 case dimensions dimension mm inches min nom max min nom max a 4.80 5.00 5.20 0.189 0.197 0.205 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.30 1.50 1.70 0.050 0.060 0.067 d 1.98 2.08 2.18 0.078 0.082 0.086 e 1.07 1.17 1.27 0.042 0.046 0.050 f 0.50 0.64 0.70 0.020 0.025 0.028 g 2.39 2.54 2.69 0.094 0.100 0.106 h 1.27 0.050 i 0.76 0.030 j 1.55 0.061 k 2.79 0.110 l 0.76 0.030 m 2.36 0.093 n 1.55 0.061 o 2.79 0.110 p 2.79 0.110 q 2.79 0.110 materials solder pad plating 0.3 to 1.0 m gold over 1.27 to 8.89 m nickel lid plating 2.0 to 3.0 m nickel body al 2 o 3 ceramic pb free sm5050-8 surface-mount 8-terminal ceramic case 5.0 x 5.0 mm nominal footprint top view bottom view case materials pcb footprint a 1 2 3 b 7 6 5 4 c d 7 6 5 4 e f g 1 2 3 8 8
www.rfm.com e-mail: info@rfm.com page 6 of 6 ?2009-2010 by rf monolithics, inc. SF2089C - 6/14/10 tape and reel specifications ?b? nominal size quantity per reel inches millimeters 7 178 500 13 330 3000 user direction of feed component orientation and dimensions carrier tape dimensions ao 5.3 mm bo 5.3 mm ko 2.0 mm pitch 8.0 mm w12.0 mm pin #1 see detail "a" 1 3 . 0 2 0 . 2 2.0 12.0 1 0 0 r e f . " b " r e f .
|
